Error Messages - Nikon COOLPIX S800c Reference Manual

Error Messages

The following table lists the error messages and other warnings displayed in the
monitor, as well as the solutions for dealing with them.
Display
O (flashes)
Battery exhausted.
Battery
temperature high.
The camera will
turn off to prevent
overheating.
Camera
temperature high.
Wi-Fi disabled.
Camera
temperature high.
Wireless disabled.
Q (● flashes red)
Please wait for the
camera to finish
recording.
Cause/Solution
Clock not set.
Set date and time.
Battery exhausted.
Charge or replace battery.
Battery temperature is high.
Turn off camera, and allow battery to cool down before
resuming use. When this message is displayed, the
power-on lamp starts flashing quickly and the monitor
turns off after 5 seconds.
Inside of the camera or the memory card has become hot.
Turn off camera, and allow battery to cool down before
resuming use.
Inside of the camera has become hot, and the Wi-Fi
(wireless LAN) function has stopped.
Press OK and allow inside of camera to cool down before
resuming use.
Inside of the camera has become hot, and the connection
between camera and smart device has been terminated.
Press OK and allow inside of camera to cool down before
resuming use.
Camera cannot focus.
Refocus.
Focus on another subject positioned at the same
distance from the camera as the intended subject.
Camera cannot perform other operations until recording
is complete.
Wait until message clears from display automatically
when recording is complete. Do not open the battery-
chamber/memory card slot cover during recording.
A
84
12, 14
19
19
–
–
24, 25
60
–
E77