Table of Contents
Advertisement
Troubleshooting
Problem
Cannot edit images.
Images not displayed on
television.
Nikon Transfer 2 does not
start when camera is
connected to a computer.
Edge of printed image is
cropped.
Cannot print panoramas.
F12
Cause/Solution
Movies cannot be edited.
Select images that support editing functions.
Images taken with another make or model of
camera cannot be edited.
Images edited with this camera may not be
displayed correctly on other cameras and
cannot be transferred to computers from
other cameras.
Select the correct HDMI option.
Both HDMI cable and USB cable are
connected to the camera.
Memory card contains no images. Replace
memory card. Remove memory card to play
back images recorded in the internal memory.
Camera is off.
Battery is exhausted.
USB cable is not correctly connected.
Confirm the compatible operating systems.
Camera is not recognized by the computer.
Refer to help information contained in
ViewNX 2.
When printing images taken at an Image
mode setting of l 4608×2592 or
m 1920×1080, the edges of images may be
cropped, preventing printing of complete
images. Refer to the documentation included
with the printer or consult the digital photo
lab for further details to make sure that the
printer supports printing at an aspect ratio of
16:9.
Take images at the Image mode setting
other than l 4608×2592 or m 1920×1080.
When printing panoramas, the entire image
may not be able to be printed depending on the
printer's settings. Additionally, printing may not
be possible depending on the printer. See the
documentation included with the printer or
consult a digital photo lab for details.
A
73
E5
E5
E5
75, E61
64, 66,
E15
16
19
14, 18
66
65
66
68
–
53
–
Hide quick links:
Advertisement
Table of Contents
