Table of Contents
Advertisement
Control Cameras
When displaying live images, the following camera controls are possible.
• Panning/tilting:
Moves a camera horizontally/vertically.
• Zooming:
Zooms in/out of images.
• Focus:
Adjusts the focus.
• Brightness:
Adjusts the brightness of the lens.
• Preset action:
Moves a camera to the preset position registered in advance.
• Auto:
Moves a camera with an auto function set in advance.
Notes:
• Depending on the models of the connected cameras, it may be impossible to control the camera or some func-
tions may be not available.
• Controlling cameras is possible only when displaying live images on a single screen.
Panning/Tilting Operation
Moves a camera horizontally/vertically.
Screenshot 1
Display the [CAM] tab.
Image display area
Control buttons/Control pad
Step 1
Moves a camera horizontally/vertically in the following
ways.
• Control buttons: Click to move the camera.
• Control pad: Click to move the camera. Panning/tilt-
ing speed will be faster if a clicked point gets farther
from the center point of the control pad.
• Image display area: Click the desired point to be the
center of the field angle in the displayed image.
The camera moves to position the clicked point as
the center point of its image.
25
Advertisement
Table of Contents
