Table of Contents
Advertisement
Recording
Start/stop recording manually.
Refer to a system administrator for the required settings for manual recording.
Refer to the Setup Instructions (PDF) for descriptions of how to turn on the unit and how to display the operation win-
dow.
Screenshot 1
Display the [HDD] tab.
Screenshot 2
The recording button will be displayed in the [Recording]
box.
10
Step 1
Click the [D] button of the [Recording] box.
Note:
Hold down the [D] button until the recording button
and the recording stop button are displayed.
Step 2
Start recording by clicking the recording button
• The [REC] indicator in the status display area will be
lit red when recording has started.
• When images from cameras are currently recorded
with higher priority than manual recording, manual
recording will be suspended until that recording fin-
ishes.
Refer to the following for further information about
each recording mode.
Step 3
Click the recording stop button
→ The [REC] indicator will go off.
Notes:
• When stopping manual recording while another
recording with a different recording mode (ex. event
recording → next page) is being performed, the
[REC] indicator will remain lit and the other recording
will continue.
• It is impossible to record images when images are
not being received from cameras.
.
to stop recording.
Advertisement
Table of Contents
