Move A Camera To The Preset Position - Panasonic WJ-HD716/1000 Operating Instructions Manual

Move a camera to the preset position

Move the camera to the preset position registered in advance.
Step 1
Display the "Preset/Auto" window. (☞ Page 67)
Step 2
Enter the preset position number to move the camera
direction.
The preset position number can be entered in the
same manner as of the preset number registration
(☞ page 67).
When entering number "000", the camera direction
will move to the home position.
Note:
• It is necessary to register the "Home" position by
configuring the settings of the camera in advance.
Step 3
Move the cursor onto the [Call] button, and then
press the [SET] button.
→ The camera direction will move to the preset posi-
tion corresponding to the entered preset position
number.
Step 4
To close the "Preset/Auto" window, press the [SET]
button after moving the cursor onto the [Cancel] but-
ton or press the [SETUP/ESC] button on the front
panel.
68