Panasonic WJ-HD716/1000 Operating Instructions Manual page 97

Specify the mask duration
Click the [C] button, and then select the mask dura-
tion from the following.
1 s, 1 min, 1 h, 24h
When the mask duration is set, any motion will not be
detected for the set duration after a motion detection.
Use the mask duration when it takes time to detect
motion or when motion is detected frequently.
Specify the time range
Click the [C] button, and then specify the time range
to be searched for.
Step 4
Click the [OK] button after completing the settings.
→ Data matched to the specified search conditions
will be displayed in list form.
Note:
• In the result list of the VMD search, the audio icon
will not be displayed in the "Audio" column even if
audio is attached to the recorded images.
• The VMD search of the pre-event recording data
will not be performed.
Step 5
Click the time and date of the desired data in the
result list.
→ Playback of recorded images of the selected data
will start.
Note:
• Recorded images will be played on a 1-screen. To
play on a multi-screen, click a multiscreen selec-
tion button in the [Multiscreen select] box after
starting playback.
• When selected time and date is too close to the
current time and date, playback may sometimes
not start. In this case, wait for a while and try to
playback again.
Step 6
To stop playback, click the [STOP] button.
→ Playback will stop. Playback in the image display
area will be switched to live image display.
97