Panasonic WJ-HD716/1000 Operating Instructions Manual page 24

Operations of the submenu
The submenu will be displayed by clicking the [S.Menu] button (☞ page 16) on the status bar.
The submenu window is the same window that can be displayed when operating the buttons on the front panel.
Refer to page 16 for further information about the functions operable on the submenu and the descriptions
about them.
The following are instructions for how to operate the submenu window and a panel displayed by selecting a
submenu (camera control panel, camera menu panel, El-zoom panel, REC & playback control panel).
Menu selection
Click any of the menu buttons. The panel of the
selected menu will be displayed.
Close the submenu window.
Click the [x] button or the [Cancel] button.
Tab selection on a panel
Click a desired tab.
Move the position of a panel
Click the [Position] button. Each time the [Position]
button is clicked, the panel will move to the next cor-
ner clockwise.
24
Operations on panels
Panels can be operated by clicking buttons on the
panel including the arrows button (C, D, A, B).
Example: When operating the El-zoom panel
• Enlarge images from the camera using the elec-
tronic zoom
Each time the [SET] button is clicked, the zoom
factor will change between x2, x4 and x1.
• Move the display area of images from cameras
When the zoom factor is x2 or x4, it is possible to
move the image display area by clicking the
arrows button (C, D, A, B).
Close the panel
Click the [x] button.