Download Print this page
Lightolier Lytecaster 300MRX Specification

Lightolier Lytecaster 300MRX Specification

Recessed downlight

Advertisement

Quick Links

Low Voltage 50W MR16 / 37W MR16 IR 12V
POWER PACK
300MRX
Features
Power Pack : Ideal for remodeling. Integral junction box with snap-off
covers permits wiring from below.
Socket : Porcelain body ; Two-pin (GX5.3 base) Pre-wired with 18 ga.
Teflon 250º leads to junction box.
Transformer : 50VA Magnetic, 120 volt primary, nominal 12 volt secondary,
class "H".
Thermal Protector : Meets CSA/UL requirements. Insulation, if used, must
be kept 3" (76mm) away from luminaire sides and junction box.
Branch Wiring : Certified for branch circuit wiring ; 4 x 14ga min.90º C supply
conductors.
WE RESERVE THE RIGHT TO CHANGE DETAILS OF DESIGN, MATERIALS AND FINISH, IN ANY WAY
THAT WILL NOT ALTER INSTALLED APPEARANCE OR REDUCE FUNCTION AND PERFORMANCE.
Lightolier CFI, 3015 Louis Amos Lachine, (Quebec) H8T 1C4
3 3/4" (95mm) aperture
Remodeler (Non-IC)
Complete fixture consists of Reflector Trim & Power Pack. Select each separately
CUT-OUT
3-3/4" (95mm)
Lytecaster
Recessed Downlight
REFLECTOR TRIM
Accepts most 3-3/4" (95mm) 300 serie trims ; see Reflector Trim
specification sheets.
Labels : CSA , UL
Damp or Wet location rated depending on trim used.
Dimming
Dimming controls: use only dimmers specifically designed for use with
transformers, like Lightolier Onset, Sunrise series LV or VA dimmers, or any
Lightolier Controls dimming system. Low voltage fixtures may produce audible
noise. Attention should be given for noise sensitive applications.
Rev: 02
300MRX

Advertisement

loading