Emerson HD7100 Owner's Manual page 14

Emerson cd, cd-r/rw player with 45 second electronic anti-skip protection and digital am/fm tuner owner's manual hd7100

Table of Contents

PRESETTING STATIONS IN MEMORY

Up to 10 AM and 10 FM stations can be stored into the Preset memories. They will

remain in memory as long as the batteries are installed.

1.) Slide the FUNCTION switch to RADIO position.

2.) Press the BAND button to select AM or FM band, press the

tune a station.

3.) Press the MEMORY button – the PROG indicator

blinks.

4.) While the PROG indicator is blinking: Press one

of the Preset buttons to store that station in Presets

M1 – M5. Example: M4.

5.) To store stations in Presets M6 through M10, tune to the desired station, press

the MEMORY button, press the M+5 button and then one of the Preset buttons.

Example: To store a station in Preset M7, press buttons "M+5" and "M2".

Note: You must press a Preset button within 5 seconds while the PROG indicator

is blinking, otherwise the station will not be memorized.

NOTE: Before you disconnect the power (AC and Battery) of the set, make sure to

press POWER OFF

seconds to reconnect the power. Otherwise, the memories may be lost and need

to be re-programmed.

HD7100_ib_0422.p65

button to turn power ' Off' , then you have approximately 30

button to

22/4/2002, 11:43

Table of Contents