Related Manuals for Emerson HD7098
Summary of Contents for Emerson HD7098
- Page 1 PERSONAL CD, CD-R/RW PLAYER w i t h 4 5 SE C O N D EL E C T R O N IC JOG FREE SKIP PROTECTION, and AM/FM RADIO OWNER’ S MANUAL HD7098 Visit our web site at www.emersonradio.com HD7098_ib080802.p65 8/8/2002, 11:00...
- Page 2 Thank you... For purchasing this Emerson Personal CD Player with AM/FM Radio. The CD player has a 20 track programmable memory so you can listen to the songs on your favorite CD's in any order you choose. Or you can use the Random playback feature and let the player select the playback order for you.
-
Page 3: Important Notes
IMPORTANT NOTES WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. Avoid installing the unit in locations described below: • Places exposed to direct sunlight or close to heat radiating appliances such as electric heaters. CLASS 1 LASER PRODUCT CLASS 1 LASER PRODUCT APPAREIL Á... -
Page 4: Location Of Controls And Indicators
LOCATION OF CONTROLS AND INDICATORS 1.) OPEN Switch – Slide to the right to unlock and open the CD door. 2.) Battery Compartment (on bottom cabinet). 3.) CD Door. CD Skip Reverse Button. CD Skip Forward Button. 6.) HOLD Switch. 7.) DC 4.5V Input Jack –... -
Page 5: Lcd Display Indicators
LCD DISPLAY INDICATORS 1.) Battery Level Indicator – Flashes when batteries need to be replaced. 2.) Anti-Skip Protection Indicator – Indicates Anti-Skip Protection is activated. 3.) Repeat 1/ALL Indicators – Appears when the Repeat playback mode is selected. 4.) PGM (Program) Indicator – Appears when programming tracks or playing programmed tracks. -
Page 6: Power Source
POWER SOURCE This CD player can be operated on either 120V 60Hz AC house current with an optional AC adapter (not included) or on 3V DC (2 "AA" batteries, not included). BATTERY OPERATION 1.) Open the battery compartment door on... - Page 7 AC OPERATION (AC Adapter not included) Connect the optional AC adapter to your 120V AC outlet. Then connect the small plug to the "DC IN 4.5V" jack on the left side of the player as shown in the following illustration. NOTE: This optional AC adapter, should be rated as follows: Input :...
-
Page 8: Normal Playback
OPERATING INSTRUCTIONS NORMAL PLAYBACK Note: Although this personal CD player can read CD-R and CD-RW discs, in addition to normal CDs, the playability of CD-R and CD-RW discs may be effected by the type of software that was used to create the discs, as well as the quality and condition of the blank media you are using. -
Page 9: Pause Control
7.) When all tracks have been played the player stops and the display shows the total tracks and playing time on the disc. After approximately 1 minute the power shuts off and the display goes blank. To stop playback before the disc ends press the Stop button at any time. -
Page 10: Repeat Playback
REPEAT PLAYBACK To repeat a single track: 1.) Press Play/Pause button to begin playback. 2.) When playback begins press select the desired track. 3.) Press the MODE button once until the Repeat “ ” indicator appears in the display. The selected track will be repeated indefinitely. -
Page 11: Intro Scan
SHUFFLE (Random) PLAYBACK Use Shuffle playback to play all the tracks on a disc in a random order selected by the CD player. 1.) At stop mode press the MODE button 4 times. The “SHUF” indicator appears in the display. -
Page 12: Programmed Playback
PROGRAMMED PLAYBACK You can program the player to play only the tracks that you want to hear, in the specific order that you want to hear them. Up to a total of 20 tracks can be programmed. You may program certain tracks to play more than once if desired. Note: The player can be programmed when it is in the Stop mode or while playing. -
Page 13: Hold Switch
ELECTRONIC ANTI-SKIP PROTECTION This CD player is equipped with automatic 45 second Electronic jog free Skip Protection and that will eliminate virtually all skipping during most active uses. When you press the Play/Pause button to begin playback the player immediately begins to store 45 seconds of music in a solid state memory that is impervious to shock. -
Page 14: Listening To Radio
Make sure that the headphone cable is unwound completely in order to provide the best reception. The AM antenna is located inside the cabinet of the CD player. If AM reception is weak, try changing the position of the CD player itself until the internal antenna is pointing in the general direction of the radio transmitter. -
Page 15: Care And Maintenance
CARE AND MAINTENANCE CLEANING THE CABINET Wipe with a soft cloth. If the cabinet is very dirty, dampen the cloth with a weak solution of neutral detergent and water, and then wipe clean. CLEANING THE LENS A dirty lens will cause sound skipping and, if the lens is very dirty, the CD may not work. -
Page 16: Troubleshooting Guide
Replace batteries. Try another disc. Clean or replace disc. Set Function switch to AM or FM position as desired. Extend headphone cord fully. reception is obtained. SERVICE PLEASE CALL: 1-800-898-9020 Emerson Radio Corp. Consumer Affairs Dept. 1901 Diplomat Drive, 8/8/2002, 11:00... -
Page 17: Limited Warranty
For repair or replacement, pack your unit in a padded box, enclose your check or money order payable to Emerson Radio Corp. in the amount of $9.00 (not required by California residents) to cover shipping and handling costs, and enclose a copy of your proof of purchase. - Page 18 EMERSON RADIO CORP. EMERSON PART NO. :16-2877 PRINTED IN CHINA 208-01 HD7098_ib080802.p65 8/8/2002, 11:00...