Table of Contents
Advertisement
Programme Timers
No Channel Name
Start
1.
ITV 1
20:00 21:00 12/05/2005
2.
BBC ONE
00:00 00:00 01/01/2005
3.
BBC ONE
00:00 00:00 01/01/2005
4.
BBC ONE
00:00 00:00 01/01/2005
5.
BBC ONE
00:00 00:00 01/01/2005
6.
BBC ONE
00:00 00:00 01/01/2005
Move/Change
Exit
MENU
• To set an event, highlight its mode button using
buttons and press OK button to display the timer
entry window.
Type:
Name:
Start:
End:
Date:
Mode:
• Here the six settings of channel type, channel name,
start time, end time, date and frequency mode can
be set. You can move freely between each setting
using
or
buttons.
• The channel type is set using
enables displaying only the selected type channels.
• The channel name is set using
display the channel which broadcasts the
programme.
• The start time, end time and date are each set with
the number buttons on the remote control in 24-hour
format.
• The frequency mode determines how often the re-
ceiver operates this event and is set with the
buttons to be either Once, Daily, or Weekly.
Hint
If an invalid number for the start or end times
or the date is entered, "Entered time is not
valid" message appears on the menu.
TV Setup
To be able to go through TV functions, you can use
this item.
The digital TV Setup menu screen is accessed from
the Main Menu. Press the
Main Menu and use
End
Date
Mode
Active
Inactive
Inactive
Inactive
Inactive
Inactive
10:42
04/07/2005
Edit Timer
More
i
OK
TV
3. ITV
00:00
00:00
03/06/2005
Once
or
buttons. It
or
buttons to
button to display the
or
buttons to highlight "TV
Setup". Press OK button to display TV Setup menu
screen.
Main Menu
or
Detailed information for all menu items is in Analogue
TV Menu System section.
Common Interface
• Press
button to display the Main Menu and use
the
or
Interface" line and press OK button.
Main Menu
Channel List
Installation
Configuration
Timers
TV Setup
Common Interface
It is required to subscribe to a pay channel company
to view the pay channels of the Digital Terrestrial broad-
casting. Obtain the Conditional Access Module (CAM)
and the Viewing card by subscribing to a pay chan-
nel company, then insert those to the Television using
the following procedure.
or
1. Switch off the TV and unplug from the mains.
2. Insert the CAM, then Viewing Card to the slot that is
located in the terminal cover at the left-hand side
of the TV (from front view).
• The CAM should be correctly inserted, it is impos-
sible to insert fully if reversed. The CAM or the TV
terminal may be damaged if the CAM is forcefully
inserted.
3. Connect the TV to the mains supply, switch on and
then wait for few moments until the card is acti-
vated.
• Some CAMs may require the following set up. Please
set the CAM by entering the IDTV menu, Common
Interface then pressing OK button. (CAM set up menu
is not displayed when it is not required.)
English - 19 -
Channel List
Installation
Configuration
Timers
TV Setup
Common Interface
buttons to highlight the "Common
Advertisement
Table of Contents
