Adding Locks To Channels; Setting Favourites; Program Guide; Common Interface - Hitachi L42VK06U Instructions For Use Manual

Adding Locks to Channels

Channel Locking provides a password-protected
access to channels selected by parents.
In order to lock a channel you should know the
Parental Lock password (default value is set to
0000 in the factory and can only be changed from the
Confi guration menu).
By pressing " " or " " buttons, highlight the channel
to be locked and select the "Lock" option by pressing
" " or " " buttons. Then press the OK button and a
password box is displayed:

Setting Favourites

To set a favourite you should highlight the "Favourites"
item at the bottom of the Channel List menu. Then
press OK button and Edit Favourite List menu
appears on the screen.
Note: You can tag/untag a selected channel by using YELLOW
button. Use GREEN button to Tag/Untag all channels.
Adding a Channel to a Favourites List
By pressing " " or " " buttons, highlight the channel
that you want to add to the favourite list. By pressing
OK button, the highlighted channel is added to
Favourite List. F icon indicates that a channel is added
to Favourite List.
Removing a Channel from a Favourite List
• Highlight the channel that you want to remove from the
favourite list and press OK button to remove.You can
press OK button again to re-adding a channel.
• To activate Favourites, go to the Confi guration menu
and select Favourite mode. Use " " or " " to set
Favourite mode as on. To cancel Favourites, set
Favourite Mode to Off.

Program Guide

This section is same with the instructions given in
the General Operations page. Please see Electronic
Programme Guide (EPG) section in the General
Operations part.

Common Interface

Press MENU button to display the main menu and
use the " " or " " buttons to highlight the "Common
Interface" line and press OK button.
It is required to subscribe to a pay channel company
to view the pay channels of the Digital Terrestrial
broadcasting.
Obtain the Conditional Access Module (CAM) and
the viewing card by subscribing to a pay channel
company, then insert those to the Television using
the following procedure.
• Switch off the TV and unplug from the mains.
• Insert the CAM, and then the viewing card to the
slot.
• The CAM should be correctly inserted, it is impossible
to insert fully if reversed. The CAM or the TV terminal
may be damaged if the CAM is forcefully inserted.
• Connect the TV to the mains supply, switch on
and then wait for few moments until the card is
activated.
• Some CAMs may require the following set up.
Please set the CAM by entering the DIGITAL TV
menu, Common Interface then pressing OK button.
(CAM set up menu is not displayed when it is not
required.)
•To see the viewing contract information:
• Enter DIGITAL TV; press MENU button, then highlight
Common Interface and press OK button.
• When no module is inserted, "No Common
Interface module detected" message appears on
the screen.
• Refer to the module instruction manual for details
of the settings.
NOTE: Insert or remove the CI module only when the TV is
in STANDBY mode or SWITCHED OFF.

TV Setup

You can use this item to display the TV functions.
The digital TV Setup menu screen is accessed from
the main menu. Press the MENU button to display
the main menu and use or buttons to highlight "TV
Setup". Press OK button to display TV Setup menu
screen.
You can fi nd detailed information for all menu items
in "Analogue TV Menu System" section.
English - 19 -