You can set Default Zoom to Full, Panoramic, 4:3
or 14:9 Zoom by pressing
button, select Blue Background.
button to set Blue Background as on or
ground. You can change menu background to Trans-
lucent or Opaque by pressing
button to change menu timeout to 15 sec,
30 sec or 60 sec.
button to change Teletext Lan-
guage to West, East, Turk/Gre, Cyrillic or Arabic.
button, select Program. Press
button to select the program number. You can also
enter a number via digit buttons on the remote control.
There are 100 program storage between 0 and 99.
Band can be selected either C or S by press
Channel can be changed by
button, select Default Zoom.
button, select Menu Back-
button, select Menu Timeout.
button, select Teletext Lan-
button or Digit But-
PAL, SECAM or AUTO.
If Sound System is set to I, SECAM is not available
for the Colour System.
NOTE: In EXT mode, you can choose NTSC 3.58,
NTSC 4.43 or PAL60 as well.
/ button to change the sound system to BG,
I, DK, L or LP.
button to adjust the tuning.
button to start program searching.You can also
enter the desired frequency via digit buttons when
search item is highlighted.
This item can be seen in all modes except YPbPr,
HDMI and PC.
If you want to watch a VCR source from one of these
modes, then it will be better to set VCR mode "on".
For this, while the cursor is on this item press the
buttons to set it On.
If you want to watch a DVD , then you must set this
or OK button to store the adjustments. "Pro-
gram Stored" will be displayed on the screen.
English - 22 -
button, select Colour System.
button to change the colour system to
button, select Sound System.
button, select Fine Tune. Press
button, select Search. Press
button, select Store Program.