Turning The Projector Off - Hitachi CP-A200 User Manual

11. Turning the projector off

Turn the projector off after turning off the other connected devices, unless mentioned in
the manuals. For this projector, follow the procedure below.
Press the STANDBY/ON button (on the
1.
projector or remote control).
The " Power off? " dialog appears on the screen
for about 5 seconds.
Confirm that there is nothing that the lens door
2.
hits while closing.
Then press the STANDBY/ON button again
while the message appears.
The projection lamp goes off, the lens door
closes, and the POWER indicator begins to
blink orange.
NOTE
POWER indicator to stop blinking and turn
steady orange.
The projector can be turned off without waiting
recommends cooling the projector down
enough.
Do not turn the projector on for about 10
minutes or more after turning it off to prevent
shortening its life.
Press the side marked " O " of the power switch, as the power-off position.
3.
The POWER indicator goes off.
from the power outlet, for safety purposes.
NOTE
Guide in the CD.
CAUTION
and for a while after use, to prevent a burn.
AUTO POWER OFF function. For details, see the Operating
POWER indicator
STANDBY/ON button
LAMP
TEMP
POWER
STANDBY/ON
INPUT
MY SOURCE/
VIDEO COMPUTER DOC.CAMERA
ASPECT AUTO SEARCH BLANK
MAGNIFY FREEZE VOLUME
ON
OFF
KEYSTONE MY BUTTON MUTE
1 2
FOCUS D-ZOOM
- + - +
POSITION MENU
ENTER
ESC RESET
STANDBY/ON button
Power
switch
11