Hitachi CP-A200 User Manual page 94

12. Replacing the lamp (continued)
NOTE
indication about the lamp.
WARNING
that each lamp has a different lifetime, and some may burst or burn out soon after you
start using them. In addition, if the bulb bursts, it is possible for shards of glass to fly
into the lamp housing, and for gas containing mercury and dust containing fine particles
of glass to escape from the projector's vent holes.
About disposal of a lamp:
trash. Dispose of it in accordance with environmental laws.
US) or www.epsc.ca (in Canada).
For more information, call your dealer.
power cord from the outlet, and make sure to request a replacement lamp
internals, or cause injury during handling, so please do not try to clean the
projector or replace the lamp yourself.
room well, and make sure not to inhale the gas or fine particles that come out
the lamp while hot can cause burns, as well as damaging the lamp.
or somewhere over your head. This is dangerous, since if the lamp's bulb
has broken, the shards will fall out when the cover is opened. In addition,
working in high places is dangerous, so ask your local dealer to have the
lamp replaced even if the bulb is not broken.
make sure that the screws are screwed in firmly. Loose screws could result in
damage or injury.
Use only the lamp of the specified type. Use of a lamp that does not meet the lamp
specifications for this model could cause a fire, damage or shorten the life of this product.
are electrical problems elsewhere besides the lamp. If this happens, contact
your local dealer or service representative.
Using the lamp for long periods of time, could cause it dark, not to light up or to
High
Voltage
www.lamprecycle.org (in the US).
High
Temperature
www.eiae.org (in the
High
Pressure
13