Caring For The Mirror And Lens - Hitachi CP-A200 User Manual

14. Caring for the mirror and lens

If the projection mirror or lens is flawed, soiled or fogged, it could cause deterioration of
display quality. Please take care of the mirror and lens, being cautious of handling.
Turn the projector off and unplug the power
1.
cord from the power outlet. And cool the
projector down by leaving it for a while as it is.
The lens door can be opened manually.
2.
Please hold both side of the lens door and
slowly open it until it is locked with clicking
sound.
3.
cloth for lens on the market, being careful not
to give any damage on the mirror and lens.
For around edge of the mirror and lens where
might be difficult to be wiped out, please use an
air blower for cameras on the market to clean
up.
To close the lens door properly, please take the
4.
following procedure.
(1) Plug in the projector.
(2) Turn on the power switch.
Even though the lens door starts to close, it
might not be closed properly.
(3) Press the STANDBY/ON button, so that the
lamp starts to light up.
(4) After the POWER indicator turns to steady
green, press the STANDBY/ON button
twice to turn off the projector.
The lens door will close properly.
NOTE
SERVICE item in the OPTION menu is set to ON . For more information, please
see the " Operating Guide " on the CD.
WARNING
power cord, then cool the projector sufficiently.
some damage.
the mirror has to be paid special attention, since these materials might give serious
damage on the mirror.
CAUTION
Cleaning cloth
LENS DOOR LOCK function of the
15