EMC QLogic User Manual page 77

Installing and Configuring the QLogic QLA4010 iSCSI HBA (TOE)
6. In the next dialog, click ReInstall Driver, and then, click Next.
7. Select Display a list of the known drivers for this device so that
you can choose a specific driver, and then click Next.
8. Select SCSI and RAID Controllers, and then click Next.
9. Click Have Disk.
10. Enter the path to the diskette containing the driver (for example,
A:\), then click OK.
11. Select the appropriate QLogic HBA from the list of drivers that
appears; then click Next.
12. Click Next in the next dialog.
13. Click YES to continue the installation.
14. Click Finish to complete the driver installation.
15. The system requests that you reboot the system. Select No and
click Close.
16. The system again requests that you reboot the system. Select NO
again.
17. If other QLogic HBAs are installed, repeat steps 5 through 16 until
all adapters are installed.
18. Reboot the host.
Windows 2003 STORPort Updates
4
4-3