Table Of Contents - EMC QLogic User Manual

Preface
........................................................................................................................... vii
Chapter 1 Introduction
Understanding Persistent Binding in a Fabric Environment .... 1-2
Chapter 2 Installing and Configuring the HBA Driver
Introduction ...................................................................................... 2-2
Installing an HBA ............................................................................ 2-3
EMC HBA Settings .......................................................................... 2-8
Installing the HBA Driver............................................................. 2-14
EMC Fibre Channel with QLogic HBAs in the Windows Environment
Downloading QLogic Drivers and Firmware ...................... 2-2
Verifying and Downloading the Documentation ................ 2-2
Special Installation Sequence for Stratus ftServers and
EMC CLARiiON Arrays .......................................................... 2-4
Special Instructions for CLARiiON CX200-Series
Direct-Connect Dual-Host Clustering Configurations ....... 2-4
Pre-Configured Settings........................................................... 2-8
Configuring NVRAM for Stratus ftServers .......................... 2-9
Fibre-Down Servers with Embedded QLogic HBAs......... 2-10
Updating Firmware/BIOS and Applying NVRAM
Settings ..................................................................................... 2-10
Manually Setting the HBA Data Rate .................................. 2-12
Setting the Topology for QLA22xx/23xx and Windows .. 2-13
Driver Revision History......................................................... 2-14
Where to Find the Driver....................................................... 2-14
Windows 2003 STORPort Updates ...................................... 2-15
Extended Error Logging by QLogic Drivers ...................... 2-15
Installation Procedure for Windows NT Hosts.................. 2-15
Contents
iii