Monitoring Functions; Function Mode - Hitachi SJ300 Series Replacement Manual

Chapter 4 - Parameter Setting
If the current setting values of the J300 are different form the SJ300 default setting value, you need to change the setting.
Please refer to the following for comparison.

4.1 Monitoring functions

No. Name
1 Output frequency setting
Multi-speed frequency setting
2
3 Output frequency setting
4 Jog frequency setting
5 Option 1 setting frequency
6 Option 2 setting frequency
7 Output frequency monitor
8 Acceleration time setting 1
Acceleration time setting 2
9 2-stage acceleration time setting
10 Deceleration time setting 1
Deceleration time setting 2
11 2-stage deceleration time setting
Motor pole number setting for rotation speed
12
monitor
13 Motor rotation speed monitor
14 Frequency scaling conversion factor
15 Scaled output frequency monitor
16 Output current monitor
17 Output current proportion monitor
18 Torque monitor
19 Manual torque boost value 1
Manual torque boost value 2
20 Manual torque boost frequency adjustment 1
Manual torque boost frequency adjustment 2
21 V/f gain setting
22 Jog frequency setting
23 FM terminal analog meter adjustment
24 Intelligent input terminal monitor

4.2 Function mode

J300
Function code
Default setting
Digital Remote
operator Operator
F2 FS 000.0
F2 1S 0.0
F2 7S 0.0
F2 TM 0.0
F2 JG 1.0
F2 O1 0.0
F2 O2 0.0
d0 FS 0.00
F6 ACC1 30.0
F6 ACC1 30.0
F6 ACC2 15.0
F7 DEC1 30.0
F7 DEC1 30.0
F7 DEC2 15.0
A25 RPM_ 4
d1 _RPM 0
A47 /Hz_ 1.0
d3 /Hz_ 0.00
d2 Im_ 0.00
- Im_ 0.0
- Torque 0
F8 V-Boost Code 11
F8 V-Boost Code 11
- V-Boost F 10
- V-Boost F 10
- V-Gain 100
A61 Jogging 1.00
F10 ADJ 172
- TERM LLLLLLLLL
18/24
SJ300
Function
code
Default setting
(Digital
operator)
F001 0.00 Can be set also by A020 in the case of the SJ300
A021 0.00
A027 0.00
F001 0.00
Jogging stop mode can be selected by A039 in the case of
A038 1.00
the SJ300.
F001 0.00
F001 0.00
d001 0.00
F002 30.00
F202 30.00
A092 15.00
F003 30.00
F203 30.00
A093 15.00
- - Not supported by the SJ300; substitutable with b086
- - Not supported by the SJ300; substitutable with d007
b086 1.0
d007 0.00
d002 0.00
Not supported by the OPE-J (J300); not supported by the
- -
SJ300
d012 0.0 Not supported by the OPE-J (J300)
A042 1.0 Voltage level is equivalent although the default settings are
different between J300 and SJ300.
A242 1.0
A043 5.0 The SJ300 has the different default setting (5%) from that
(10%) of the J300.
A243 5.0
A045 100
Jogging stop mode can be selected by A039 in the case of
A038 1.00
the SJ300.
AM and AMI terminals can be also adjusted independently in
b081 60
the case of the SJ300.
Note: Displayed by the 4-digit display; intelligent output
d005 Note
terminal monitor is also supported by d006.
Remarks