Hitachi SJ300 Series Replacement Manual page 13

AL0
AL2 AL1
Figure 14
Normally open contact
Power Inverter
status
ON Normal Open
ON Error
OFF
－
3.3 Intelligent output terminals
(1) Default setting
While the J300 has 2 intelligent output terminals, the SJ300 has 5 terminals.
The SJ300 has different default settings, symbols, and data for the intelligent output terminals
from those for the J300. Chart 7 lists the default settings that can be seen on the display of the
digital operator.
Terminal
Function
symbol
code
11 C10
12 C11
13 -
14 -
15 -
(2) Contact logic conversion
For both J300 and SJ300, intelligent output terminals default to normally open, but you can
select normally closed for the terminals by converting the sense of the logic.
Terminal
symbol
AL0
AL2 AL1
AL0-AL AL0-AL
1 2
Closed
Closed Open
Open Closed
J300 default setting
Description
Frequency arrival
(constant speed)
RUN signal RUN (1)
-
-
-
Chart 7
Intelligent output terminal default setting
Function code
AL0
AL2 AL1
Normally closed contact
Power Inverter
ON
ON
OFF
SJ300 default setting
Function
Data
code
Frequency arrival
FA1 (0) C021
(constant speed)
C022
- C023 advance notice
- C024
- C025
Data (option code)
00 01
13/24
AL0
AL2 AL1
Figure 15
AL0-AL AL0-A
status 1
Normal Closed Open
Error Open Closed
Open Closed
－
Description Data
FA1 （01）
RUN signal RUN (00)
Overload
OL （03）
signal
Over-torque
OTQ （07）
signal
Instantaneous
power failure IP （08）
signal
L2