Setting The Time And Date - Hitachi VTMX110EUK Operating Instructions Manual

The main menu will appear on the screen
* After you have confirmed the last channel that can be
sorted, you will automatically return to the main menu since
no more TV channels can be assigned.
0 To assign other TV channels to a programme number,
repeat steps 7to 9.
A Confirm the assignment of the TV channel with
B To exit the main menu, press

Setting the time and date

If the display shows an incorrect time or '--:--', the time and
date must be reset manually.
If a TV channel which transmits TXT/PDC (teletext/PDC) is
stored under programme number 'P01', time/date will
automatically be taken from the TXT/PDC information.
(SMART CLOCK)
1 Switch on the TV set. If required, select the programme
number for the video recorder.
2 Press
on the remote control. The main menu will
MENU
appear.
3 Select line 'CLOCK' using
with .
OK
CLOCK
YEAR
MONTH
DATE
TIME
SMART CLOCK
________________________________
EXITpMENU
4 Check the year in line 'YEAR'. If required, please change
the year with the number buttons
control.
5 Select the next line with
6 Check 'MONTH', 'DATE' and 'TIME' in the same way.
Time/date is displayed incorrectly despite manual
setting
* With Smart Clock, time/date is transferred from the TV
channel saved on 'P01' and automatically corrected.
Switch off Smart Clock. In line 'SMART CLOCK', select 'OFF'
using Q or P .
You can switch on 'SMART CLOCK' again when you select
'ON'.
7 Check the displayed settings and confirm with
'STORED' will appear briefly on the screen.
8 To end, press
MENU
MENU
.
MENU
P- = ;P+
or and confirm
è 2001 p
01
01
20:00
ON
STOREpOK
on the remote
0-9
;P+ or P- = .
OK
.
.
.
11