Problem Solving For Programmed Recordings; How To Check, Change Or Delete A Programmed Recording (Timer); Nextview Link - Hitachi VTMX110EUK Operating Instructions Manual

Problem solving for programmed
recordings
The video recorder does not react
* While a programmed recording is being made, you cannot
operate your video recorder manually. If you want to cancel
the programmed recording, press
'SWITCH TO STANDBY- TIMER RECORDING' flashes on
the TV screen
* The video recorder was switched on several minutes
before the start of a programmed recording.
Switch off the video recorder with
programmed recording (timer) will only function if the video
recorder is switched off.
A cassette was automatically ejected during recording
* The end of the tape was reached during recording.
Error message: 'NO CASSETTE' '
recorder display
* No cassette was inserted. Insert a cassette and switch off
STANDBY m
the video recorder using
The 'PROTECTED CASSETTE' error message appears
briefly on the screen then the cassette is ejected
* A cassette was inserted with the security tab removed.
Undo the erase protection (chapter 'Manual Recording',
section 'Preventing accidental erasing of cassettes') or
insert a different cassette.
Error message: 'ALL TIMERS OCCUPIED'
* If this error message appears after pressing
all TIMER blocks are already programmed. No more
recordings can be programmed. If you want to clear or
check a programmed recording (TIMER block), select it with
;P+ P- =
or .
The 'DATA ERROR' message appears on the screen
* The data for the recording could not be transferred. Please
check date, start time and end time of the programmed
recording.
STANDBY m
.
STANDBY m . A
k
' will flash in the video
.
, then
TIMER
How to check, change or delete a
programmed recording (TIMER)
1 Switch on the TV set. If required, select the programme
number for the video recorder.
2 Press
on the remote control twice .
TIMER
3 Select the programmed recording (TIMER) you want to
check, change or delete with
Delete programmed recording
Press .
CLEAR (CL)
'--' appears rather than the displayed values
To end, press .
MENU
4 Press
.
TIMER
Select the input field with
If required, change the information with
the number buttons
0-9
5 Confirm with
.
OK
6 Switch off with
STANDBY m

'NexTView Link'

This video recorder is equipped with the function 'NexTView
Link'. If your television is also equipped with this function, you
can mark TV programmes on the television for programming.
These TV programmes will automatically be transmitted to a
TIMER block on the video recorder.
For more information, read the instruction manual of your TV
set.
P- = or ;P+ .
Q P
or .
;P+ , P- =
.
.
or
23