McAfee EPOCDE-AA-BA - ePolicy Orchestrator - PC Product Manual page 75

Switching source and fallback sites
Use this task to change which sites are the source and fallback sites. Depending on your network
configuration, you might find that HTTP or FTP updating works better. Therefore, you might want to
switch the source and fallback sites.
For option definitions, click ? in the interface.
Task
Click Menu | Configuration | Server Settings.
1
2 Select Source Sites, then click Edit. The Edit Source Sites page appears.
3 From the list, locate the site that you want to set as fallback, then click Enable Fallback.
Editing source and fallback sites
Use this task to edit the settings of source or fallback sites, such as URL address, port number, and
download authentication credentials.
For option definitions, click ? in the interface.
Task
Click Menu | Configuration | Server Settings.
1
2 Select Source Sites, then click Edit. The Edit Source Sites page appears.
3 Locate the site in the list, then click on the name of the site.
The Source Site Builder wizard opens.
Edit the settings on the wizard pages as needed, then click Save.
4
Deleting source sites or disabling fallback sites
Use this task to delete source sites or disable fallback sites.
For option definitions, click ? in the interface.
Task
1 Click Menu | Configuration | Server Settings.
Select Source Sites, then click Edit. The Edit Source Sites page appears.
2
Click Delete next to the required source site. The Delete Source Site dialog box appears.
3
Click OK.
4
The site is removed from the Source Sites page.
Configuring advanced server settings
Configuring source and fallback sites
® ®
McAfee ePolicy Orchestrator 4.6.0 Software Product Guide
7
75