Setting The Display Brightness; Changing The Input Display; Muting The Av Receiver - Onkyo TX-NR626 Owner's Manual

Setting the Display Brightness

You can adjust the brightness of the AV receiver's
display.
1
Press RECEIVER once followed by DIMMER
repeatedly to switch between: normal, dim, or
dimmer brightness.
Tip
• (North American and Taiwanese models)
Alternatively, you can use DIMMER on the AV
receiver.

Changing the Input Display

When you connect an -capable Onkyo
component, you must configure the input display so
that can work properly.
This setting can be done only from the front panel.
1 Press TV/CD or GAME.
"TV/CD" or "GAME" appears on the AV receiver's
display.
2
Press and hold down the same button (about
3 seconds) to change the input display.
Repeat this step to select the desired input
display.
→
■
TV/CD:
TV/CD DOCK
→
TAPE
GAME ↔ DOCK
■
GAME:
"
Note
• "DOCK" can be selected for the "TV/CD" or "GAME"
input selector, but not at the same time.
• Enter the appropriate remote control code before using
the remote controller for the first time

Muting the AV Receiver

You can temporarily mute the output of the AV
receiver.
1
Press RECEIVER followed by MUTING.
The output is muted and the MUTING indicator
flashes on the AV receiver's display.
Tip
• To unmute, press MUTING again or adjust the volume.
• Muting is automatically cancelled when the AV
receiver is set to standby.
(➔ page 72).
En-46
Playback