Meyer Sound MM-10 Operating Instructions Manual page 40

APPENDIX A: MM-10 ACCESSORIES
PHOENIX AND EN3 LOUDSPEAKER CABLES
The following Phoenix and EN3 cables are available from Meyer Sound and can be used to connect MM-10XPs to
MPS-488HPs, as well as to connect MM-10ACXs to satellite loudspeakers.
NOTE: Phoenix and EN3 loudspeaker cables and bulk cable use Belden 1502R (regular) or Belden 1502P (ple-
num) cable. Belden 1502 is a composite cable comprised of two 18 AWG wires for DC power, two 22 AWG
wires for balanced audio, and one 24 AWG wire for audio shield.
Phoenix and EN3 Loudspeaker Cables
Part Number Cable
524.014 Bulk (no connectors)
524.015 Bulk (no connectors)
28.163.009.01 EN3 5-pin female to pigtail
28.163.009.11 EN3 5-pin female to pigtail
28.163.009.21 EN3 5-pin female to EN3 5-pin male
28.163.009.22
28.163.009.23
28.163.009.24
28.163.009.25
28.163.009.26
28.163.009.31 EN3 5-pin female to EN3 5-pin male
28.163.009.32
28.163.009.33
28.163.009.34
28.163.009.35
28.163.009.36
28.163.033.01 Cable coupler EN3 5-pin female-to-male (joins two cables: one with an EN3 5-pin male
cable mount connector to one with an EN3 5-pin female cable mount connector)
28.163.009.41 EN3 5-pin female to Phoenix 5-pin female
28.163.009.42
28.163.009.43
28.163.009.44
28.163.009.45
28.163.009.46
28.163.009.51 EN3 5-pin female to Phoenix 5-pin female
28.163.009.52
28.163.009.53
28.163.009.54
28.163.009.55
28.163.033.01
40
Color Coating
Black Regular 500 ft spool
White Plenum 500 ft spool
Black Regular
White Plenum
Black Regular
White Plenum
Black Regular
White Plenum
Length
10 ft
10 ft
10 ft
20 ft
30 ft
50 ft
100 ft
150 ft
10 ft
20 ft
30 ft
50 ft
100 ft
150 ft
10 ft
20 ft
30 ft
50 ft
100 ft
150 ft
10 ft
20 ft
30 ft
50 ft
100 ft
150 ft