The Symbols On Your Video Recorder Display - Hitachi VTFX140EUKN Operating Instructions Manual

The symbols on your video recorder
display
These symbols can light up on your video recorder display:
This is where the current operating mode is
shown as a symbol.
LP When you have switched on the LP (Long Play)
function or when you play a tape that has been
recorded in LP (Long Play).
When you have switched on the child lock.
When a satellite recording has been
programmed.
DEC When a decoder has been allocated to the TV
channel (currently selected programme number
on the video recorder) you have currently
selected on the video recorder.
When you play a cassette that has been
recorded with hifi sound, or when a hifi sound is
transmitted.
When you are making a recording.
k
When you have programmed a recording or
when a programmed recording is being made.
D When you are programming daily recordings.
W When you are programming weekly recordings.
When you have put a cassette in the video
recorder.
DATE When the date of the programmed recording is
shown.
START When the start time of the programmed
recording is shown.
PROG. When the programme number of the
programmed recording is shown.
END When the end time of the programmed recording
is shown.
VPS/PDC Video Programming System / Programme
Delivery Control: when a VPS or PDC code is
being transmitted.
Display of programme number of the TV channel
/ tape position / channel name / function.
Tape position in seconds.
13