Connecting An Hdmi Or A Dvi Device To The Hdmi Input - Hitachi P42H01U User Manual

CONNECTION (continued)
Connecting Procedure (continued)
PC connection
For best results the PC graphics card should be set to 1360 x 768@60Hz. Before connecting your PC please ensure
that it is set to this resolution (or one of the other acceptable resolutions listed below) or you may not be able to see
a picture.
Use a PC-VGA lead (not supplied) to connect your
PC to this unit. Plug the lead carefully not to break or
bend the contact inside of plug.
Select PC input
Switch on this unit.
Select the PC input mode
NOTE
• If there is no video signal from the computer when the unit
is in PC mode, "NO SIGNAL" will appear on the TV screen
for approx. 10 seconds.
• See for the PC Monitor Menu.
27

Connecting an HDMI or a DVI device to the HDMI input

The HDMI input receives digital audio and uncompressed video from an HDMI equipped device or uncompressed
digital video from a DVI equipped device. When you connect to a DVI device with a HDMI-to-DVI adapter lead, it
only transfers the video signal, so it is necessary to use separate analogue leads (RCA/Phono type) to transfer the
audio signals. Select the HDMI1 or HDMI2 input mode
See "HDMI1" or "HDMI2" in Audio menu on
NOTE
• As well as HDMI-2, you can also use HDMI-1 IN to
connect to DVI equipped device - in this case, you must
connect the audio leads to the PC/HDMI-1 AUDIO IN
sockets.
• Some devices may not operate properly with the TV.
HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing LLC.
This set is classed as "HD-Ready". This
means that it is capable of displaying HD
(High Definition) signals when connected
to a suitable HD source, such as an HD receiver or
DVD player that has HD capability, via HDMI, DVI, or
Component Video connections.
.
19
Monitor Display modes
MODE Resolution
VGA 640x400
VGA 640x480
WVGA 848x480
SVGA 800x600
for the selecting the HDMI audio input source.
24
TV (Rear bottom view)
VGA lead
(not supplied)
Refresh rate
70Hz
60/75Hz
60Hz
60/75Hz
.
19
Audio lead (not supplied)
to HDMI-2
AUDIO input
TV (Rear
bottom view)
HDMI cable (type A connector)
Details of HDMI input signals
HDMI compliant (type A connector), HDCP compliant
Suggested scan rates:
HDMI Audio:
to PC/HDMI-1
AUDIO input
Audio lead
(not supplied)
MODE Resolution Refresh rate
XGA 1024x768 60/75Hz
WXGA 1280x720 60Hz
WXGA 1280x768 60Hz
WXGA 1360x768 60Hz
(according to Graphic card)
DVI device
To DVI
output
HDMI - to - DVI adapter lead
(HDMI type A connector)
(not supplied)
HDMI device
(not supplied)
To HDMI output
PAL: 576i/576p/720p/1080i
NTSC: 480i/480p/720p/1080i
2-channel PCM,32/44.1/48kHz
sampling frequency16/20/24
bits per sample
PC
or
17