Table of Contents
Advertisement
All manuals and user guides at all-guides.com
OPERATING INSTRUCTIONS
Turning Power On and Off
To turn on the set power supply, set the MAIN POWER switch (
press the SUB POWER button (
the remote control.
To turn off the set power supply, press the SUB POWER button (
button of the remote control, then set the MAIN POWER switch (
For normal operations, leave the main power switch (
button or the Power button of the remote control to turn the power on and off.
The indicating lamp lights when the power is turned on.
Display lamp
Lights red
Lights or blinks green
When the indicating lamp blinks in green or the message "POWER SAVE" or "OUT OF FRQENCY"
appears on the screen, there is something unusual about the status of reception. See "Symptoms That
Seemingly Appear to be Failures."
Avoid repeatedly turning the monitor on and off at short time intervals.
• Failures might result from such operation.
Turn off the main power switch (
TIPS
an extended period of time.
If a power failure occurs while the set is running, it would be powered on upon recovery
from the failure. Turn off the unit main power switch before leaving the set.
Input Selection
Press the RGB/VIDEO button on the remote controller or the unit to switch the input in the sequence
of RGB1
RGB2
RGB1.
The kinds of input for which SKIP has been selected with the on-screen
display system, EasyMenu (
19
Volume Adjustment
While the on-screen display system, EasyMenu (
VOLUME button
or
The adjustment status will be displayed as guidance while you press these buttons.
• While the guidance is on display, press
volume.
• While the guidance is on display, press
the volume.
You can also adjust the sound volume setting via the on-screen
display system, EasyMenu
18
.
The sound volume adjustment mode will exit when no keys are
entered for 5 seconds. (The adjustment status guidance will
disappear automatically.)
14
) or the POWER button of
) set to ON and use the sub power
Power status
Off
On
23
) before leaving the monitor out of use for
), are skipped.
16
) is not on display, press the remote controller
(or the unit VOLUME button
or
to turn up the
Remote
controller
or
to turn down
VOLUME
Set unit
[VOLUME]
) of the main unit to ON and then
) of the main unit or the POWER
) to OFF.
Main power
switch
POWER
Set unit
Remote
controller
Remote
controller
RGB/
RGB1
(D-sub input)
VIDEO
RGB2
(BNC input)
Set unit
RGB/VIDEO
or
to adjust the sound volume.
Sound volume setting
VOLUME
: 30
Adjustment status guidance
Advertisement
Table of Contents
