Technical Information; Common Interface - Hitachi P42H01U User Manual

DTV MENU OPERATION (continued)
System configuiation (continued)
Parental
Lock
Password
Setup
Change password
NOTE
• To view a locked channel, you must enter a PIN. When you select a locked channel, a PIN prompt message pops up. Enter the 4
digit number using 0–9.
• As a precautionary measure, make a note of your PIN on the back of this operation manual, cut it out and keep it in a
safe place that children cannot reach.

Technical information

Version
Software Upgrade *
1
NOTE
* 1 This function is available when you select "UK" in step 3 in "Auto setup"
* 1 During Software Updating process, do not turn off the TV, and you cannot control any buttons.
1
* If you turn off the TV, disconnect the AC cord, or a power failure occurs during Software Updating, the update will fail, and you will
not receive digital services.
If you turn on the TV again, "Software upgrade" screen will be displayed, and update software again. If the "Software upgrade" still
fails, ask qualified service personnel.
1
* After Software Updating process, the memory of Digital Menu setting will be lost. Please do necessary resetting.

Common Interface

Check the detailed information on the Common Interface module card in use.
1
Press ENTER while the cursor is on "Common Interface".
• The CI module name is displayed.
2
Press ENTER to access the CI menu.
• Detailed information on the CI card in use is displayed.
3
Press / to select the item, and then press ENTER.
• Detailed information on the selected item is displayed.
32
This function allows TV and Radio services to be restricted. It prevents children
from watching violent or sexual scenes that may be harmful.
① Press / to select "Password Setup", and then press ENTER.
4, 5, 6, 7, 8,
② If you already set the PIN, enter it here. If not, enter the factory preset PIN "0000".
...18/None
③ Press / to select "Parental Lock".
④ Press / to select the desired age/rating." (4...18/None)
① Press / to select "Change password".
② Enter the 4-digit number as a PIN using 0–9.
③ Enter the same 4-digit number as in step ② to confirm.
"Successfully updated" displays."
④ Press EXIT.
Check the version information of the digital module.
Press / to select "Version", and then press ENTER.
• The hardware and software versions are displayed.
① Press
to select "Technical Information".
/
② Press / to select "Software upgrade", and then press ENTER.
• "Confirmation" screen displays.
• When you tune to the service that provides the upgrade via Over Air Download, a
confirmation message displays. Follow the screen prompts.
③ Press
to select "Yes", then press ENTER.
/
• If you select the option "Yes", then the Software
It will take about 20 minutes and after this process is complete the TV will be
rebooted automatically. If you select the option "No" you can continue to watch TV
programmes.
Password Setup
Parental Lock
Change password
Main menu
A C A C
B B
Upgrading process will be started.
.
19
Cl Module
None
– – – –
Navigate
Enter Exit
Technical Information
Version
Software upgrade
Enter Exit