Hitachi P42H01U User Manual page 27

TV SETUP OPERATION (continued)
Setup menu (continued)
VERTICAL POSITION *
REC SCREEN STATUS
2
AV2 OUTPUT *
AV2 INPUT
AV COLOUR * 3
AUTO 4:3 DEFAULT *
SIDE PANEL COLOUR
SCREEN SAVER
INVERSION
SCREEN WIPE
RESET TV SETTING
NOTE
* 1 You cannot move the picture vertically in any of the other picture format.
* 2 This determines whether the AV2 outputs the signal from the internal tuner or whatever input is shown on the screen.
Please note that AV1 is fixed to the internal tuner. So, you cannot select the output-signal. AV1 always outputs the signal from the
internal tuner.
* 3 PAL is the colour system used in UK, Germany, etc. NTSC 3.58 is used in the USA. PAL 60 is used in the UK by some video
recorders, when playing an NTSC recording on a PAL system TV set.
Different DVD players produce different types of output signal according to the exact model, such as PAL, SECAM, NTSC 4.43,
NTSC 3.58 and PAL 60.
However the best type of signal to use is RGB, so ideally you should select this type of output signal in the DVD player's menu
system, and connect the DVD player to the TV with a SCART lead.
* 4 AUTO 4:3 DEFAULT is available only for AUTO picture size setting.
4
* In HDMI or COMPONENT mode, AUTO 4:3 DEFAULT is available only for 480i/576i mode.
26
-10~+10
1
ON
OFF
TV
MONITOR
AV
S-VIDEO
AUTO
PAL
SECAM
NTSC4.43
NTSC3.58
PAL60
4:3
4
PANORAMIC
GRAY
BLACK
ON
OFF
When the ZOOM mode is selected as the picture format, you can
adjust the vertical picture position.
Press then press
picture by up to +10 and downwards by up to -10.
This function is used in conjunction with the Timer function that is
included as part of the Digital EPG. It determines whether the TV
screen switches on or not when a programmed Timer setting begins
.
34
AV2 will output the channel position that the internal tuner is set to.
AV2 will output the picture currently displayed on the TV screen.
Composite signal (e.g. from VHS-Video recorder).
S-Video signal (e.g. from DVD player with S-Video output).
The AV Colour setting only applies when viewing devices connected
to the AV inputs.
This option selects the default way that a 4:3 signal is shown - either
as normal "4:3" or expanded in the "PANORAMIC" mode.
You can change the color of side bars showing up in 4:3 mode. It is
recommended to set GRAY to reduce image retention.
This is one of the initiatives to reduce image retention by moving the
displaying screen slightly at interval.
The picture is displayed alternately between positive image and
negative image to reduce the risk of phosphor burn-in of the screen.
This function is effective for a still pattern image.
Press . MENU disappears and the picture showing on the screen
will be replaced with a white screen. The screen will return to normal
when any button is pressed.
Reset all adjustment items to the factory preset values.
Video Audio
V E R T I C A L P O S I T I O N
R E C S C R E E N S T A T U S
A V 2 O U T P U T
A V 2 I N P U T
A V C O L O U R
: SEL ECT
or to adjust the vertical position of the
Setup
O N
T V
A V
A U T O
: ADJUST
M ENU : RE T U RN