Interface Connection - Elo TouchSystems ET2639L User Manual

Interface Connection

Connector Panel on Rear side of Monitor
Serial Cable (not
Power Cable
included with
ET2639L-Axxx
models)
To connect your touchmonitor to your computer:
1
2
3
4
5
Power
OSD box
Button
connector
Connect the power cable to the rear panel of the monitor and the
other end to the power outlet.
Connect either the USB cable OR the serial cable to the rear
panel of the monitor. Note: Do not use both. Connect the other
end to your computer.
Connect the video cable and/or the DVI-D cable to the rear panel
of the monitor. Tighten by turning the two thumb screws clockwise
to ensure proper grounding. Connect the other end to your
computer.
Connect the OSD control box to the monitor.
Press the power button on the rear panel to turn the monitor on.
DVI-D cable
USB cable
(not included with
ET2639L-xxxx-x-
A-x models)
Elo TouchSystems ET2639L User Guide
Analog Video
Cable
8