Touch Interface Connection
Before connecting the cables to your touchmonitor and PC, be sure that the computer and
Note:
touchmonitor are turned off.
1. Connect one end of the power cord to the monitor and the other end to the outlet.
2. Connect one end of either the touchscreen serial(RS232) cable or the touch screen USB cable
3. Connect one end of the video cable to the rear side of computer and the other to the LCD monitor.
4. Press the power button on the front panel to turn the monitor power on.
2-10 Elo Touchmonitor User Guide
(but not both) to the rear side of the computer and the other end to the LCD monitor. Tighten by
turning the two thumb screws clockwise to ensure proper grounding(USB cable does not have
thumb screws)
Tighten by turning the two thumb screws clockwise to ensure proper grounding.
DC JACK
1
2
2
Power Cord
USB Cable
Serial Cable
For APR model only
DC JACK
1
2
Power Cord
USB Cable
3
Video Cable
3
Video Cable