Record Setup - Schedule Setup - Lorex L15LD400 series Instruction Manual

15" lcd color observation system with built-in 4 channel triplex digital video recorder and 4 night vision ccd cameras

Hide thumbs Also See for L15LD400 series:

Table of Contents

Record Setup

Record Setup - Schedule Setup

1. CHANNEL - Select a single channel to setup the

schedule.

2. TYPE - Select a recording mode:

•

Continuous

constantly occurring.

• Motion: Begins the recording when motion is

detected.

• Alarm: Begins the recording when an alarm

is detected

• Motion and Alarm: Sets the system to

record when Motion and/or an Alarm is

detected.

3. 0~24 Hour - Activate or deactivate the schedule

for a particular hour in a week.

4. SUN~SAT - Activate or deactivate the scheduled

hours in a day. All hours in the day can be activated

or deactivated by double clicking on the name of

the day (i.e. Mon., Tue etc.).

NOTE: If the DVR is set to MOTION RECORDING

and the DVR keeps recording continuously or is not

triggered to record as expected, please check the

sensitivity settings and the motion mask setup in

CONFIGURATION>MOTION SETUP.

If the motion settings are too sensitive, you may

want to lower the sensitivity level and define a

motion detection area for more accuracy. If the

motion is not triggered as expected, you may want

to increase the sensitivity level, clear the motion

mask, or enlarge the detection area.

Recording:

Recording

Table of Contents