Time/Date Setup; Configuration; Password Setup; Buzzer Setup - Lorex L15LD400 series Instruction Manual

15" lcd color observation system with built-in 4 channel triplex digital video recorder and 4 night vision ccd cameras

Hide thumbs Also See for L15LD400 series:

Table of Contents

TIME/DATE SETUP

The date and time set by the manufacturer may be

different from your time zone. It is very important to

configure the system date and time before starting

recording. Set the date and time by using Mouse

wheel:

• DATE FORMAT- Asia/American/European

• TIME FORMAT- 12 hours/24 hours

• MONTH FORMAT- English/Numeric

NOTE: It is strongly recommended to Set the time/

date, Reset all factory defaults and CLEAR the Hard

Drive.

The password consists of 1 to 8 digits. Click the 0~9

icons (or front panel buttons) to enter the password.

Then click ENTER to confirm and enter the system.

1. USER ID - Display User ID.

2. USER PW - Enter the current password.

3. NEW PW - Enter the new password.

4. CONFIRM PW - Enter the new password again for

confirmation.

1. KEY TONE - Turn the system beep ON/OFF (when

buttons are pressed on the front panel or remote

control).

2. VIDEO LOSS - Turn the beep ON/OFF when a

Video Loss event is detected.

3. ALARM ACTIVE - Turn the beep ON/OFF when

an Alarm event is detected.

4. DURATION - Sets the duration for the alarm

(10~590 seconds)

Table of Contents