Camera Setup; Motion Setup - Lorex L15LD400 series Instruction Manual

15" lcd color observation system with built-in 4 channel triplex digital video recorder and 4 night vision ccd cameras

Hide thumbs Also See for L15LD400 series:

Table of Contents

Configuration

CAMERA SETUP

1. CHANNEL - Select the camera to be modified.

2. TITLE - Input the camera Title, max. 8 characters.

3. BRIGHTNESS - Adjust image brightness (-32~31).

4. CONTRAST - Adjust color contrast (-32~31).

5. SATURATION - Adjust color saturation (-32~31).

6. HUE - Adjust color hue (-32~31).

1. CHANNEL - Select a channel for the setup.

2. SENSITIVITY GRADE - Adjusts the motion

detection sensitivity. 1 (LOW)~5 (VERY HIGH)

3. RECORD DURATION - Sets the record duration

from the time that motion is detected. If the system

detects continuous motion, it keeps recording

throughout the event, and for the duration after the

last motion event.

• For example, the duration is set to 10 seconds,

and the motion last for 3 minutes. The system

records for 3 minutes and 10 seconds.

4. DETECT CELL NUMBER - Recording will only be

triggered when the cells in motion are MORE

THAN the number the user has set. The smaller

the number, the more sensitive the detection is.

5. MOTION MASK - Area detection setup - sets which

areas detect motion and which areas do not to

detect motion.

• The area that is not detecting motion is Grey.

• Click the left mouse button and drag the zone

WITHOUT motion detect

• Click the right button of mouse and drag the zone

WITH motion detect.

Table of Contents