Camera Setup & Placement - Lorex HC64A Series Quick Start Manual

Camera Setup & Placement
1. Pair your camera to the LSHSC per the Device Setup page (p. 7).
2. Place the camera on any flat surface or mount it to a wall per the guidelines below to optimize
motion detection accuracy.
To optimize motion detection accuracy when mounted on a wall:
Distance
Optimal accuracy for objects within 6.5-32ft (2~10m).
Angle
Angle the camera around 15°-30° down from the level position.
Height
Install the camera between 7-10ft (2~3m) off of the ground.
6.5-32ft
HC64A_QSG_TRILINGUAL_R4.indd 19 HC64A_QSG_TRILINGUAL_R4.indd 19
7-10ft
16
2021-06-15 4:42:12 PM 2021-06-15 4:42:12 PM