Camera Setup; Motion Setup - Lorex SHS-4QM Instruction Manual

Camera Setup

• SWITCH BETWEEN CAMERAS - Use
⇐ ⇒
the buttons to switch between
CAMERA 1~4.
• TITLE - Sets the name for the individual
Camera. Press the
navigate, and press the
to select a character (A-Z, 0-9).
• BRIGHTNESS
SATURATION / HUE / SHARPNESS -
Individual camera display settings.
⇑ ⇓
Press the buttons to navigate, and
⇐ ⇒
press the buttons to set the value.
• MIRRORING - Sets the display image
to a mirrored view. Press the
to navigate, and press the
to set to ON or OFF.
• Press the MENU button to EXIT. All
settings will be saved.

Motion Setup

• SWITCH BETWEEN CAMERAS - Use
⇐ ⇒
the buttons to switch between
CAMERA 1~4.
• DETECTION TIME - Turns Motion
Detection to ALWAYS ON, ALWAYS
OFF or ON/OFF TIME. Individual
cameras can be set by pressing the . to
switch between CAM1~CAM4. Press
⇑ ⇓
the buttons to navigate, and press
⇐ ⇒
the buttons to set the Detection
Time:
ALWAYS ON - Motion is always
detected
ALWAYS OFF - Motion is never
detected
ON/OFF TIME - Sets the start and
end times that motion is to be
detected. Set the ON and OFF times
using the directional arrows to
adjust.
⇑ ⇓
buttons to
⇐ ⇒
buttons
/ CONTRAST /
⇑ ⇓
buttons
⇐ ⇒
buttons
CAMERA SETUP
CAMERA 1
TITLE: CAMERA01
BRIGHTNESS: 0
CONTRAST: 0
SATURATION: 0
HUE: 0
SHARPNESS: 0
MIRRORING: OFF
⇑⇓ ⇐ ⇒
SELECT ADJUST
MOTION SETUP
CAMERA 1
DETECTION TIME
ALWAYS ON
ON: 00:00
OFF: 13:00
SENSITIVITY: 0
VELOCITY: 0
MASKING AREA
X,Y (00,00)
⇑⇓ ⇐ ⇒
SELECT ADJUST
Menu Setup
MENU EXIT
MENU EXIT
19