Listening To The Tuner - Fujitsu ECLIPSE CD8445 Owner's Manual

Basic operation

Listening to the tuner

Press the [FM AM] button.
This will turn the tuner on.
Press the [FM AM] button for less than one second to
switch to the desired FM or AM bands.
For example, radio bands will switch from FM1 ➔ FM2 ➔ FM3 ➔
AM with each press of the button.
Turn the [SEL] button to the left or right to tune to a
station.
Turn to the right: Tunes to higher frequencies.
Turn to the left: Tunes to lower frequencies.
Press the [ ] or [
search.
[ ] button: Starts searching toward higher frequencies.
[ ] button: Starts searching toward lower frequencies.
● If stations have been stored in memory, pressing a button from
● When an optional HD Radio tuner unit is connected, digital
[FM AM] button
Buttons [1] to [6]
] button to start the automatic station
[1] to [6] will directly select a station. (Refer to the section
"Manually setting stations into memory" on page 106)
broadcasts have reception priority. (U.S.A. only)
[SEL] button
44
[ ] button
[ ] button