Listening To The Tuner - Fujitsu CD5425 Owner's Manual

Basic operation
[FM AM] button

Listening to the tuner

Press the [FM AM] button.
This will turn the tuner on.
Press the [FM AM] button for less than one second to
switch to the desired FM or AM bands.
Radio bands will switch from FM1 ➔ FM2 ➔ FM3 ➔ AM in order
each time the button is pressed.
Turn the [SEL] button to the left or right to tune to a
station.
Turn to the right: Tunes to higher frequencies.
Turn to the left: Tunes to lower frequencies.
Press the [ ] or [
search.
[ ] button:
[ ] button:
● If stations have been stored in memory, pressing a button from
● When an optional HD Radio tuner units is connected, digital
Buttons [1] to [6]
] button to start the automatic station
Starts searching toward higher frequencies.
Starts searching toward lower frequencies.
[1] to [6] will directly select a station. (Refer to the section
"Manually setting stations into memory" on page 64)
broadcasts have reception priority. (U.S.A. only)
[SEL] button [ ] button
26
[ ] button