How To Operate The Sound Adjustment Mode; About Sound Adjustment Mode - Fujitsu ECLIPSE CD8445 Owner's Manual

How to operate the Sound Adjustment Mode

About Sound Adjustment Mode

This deck is equipped with two different sound adjustment modes: normal
mode and advance mode.
In normal mode, the acoustic characteristics inside the vehicle can be
adjusted using comparatively simple settings. In addition, it corresponds to
basic sound systems which comprise front speakers, rear speakers, and
subwoofer.
In advance mode, the sound quality characteristics can be adjusted item by
item using more sophisticated settings than in normal mode. Refer to the
table below and to the operations for each mode for details of each mode.
The following adjustments can be made in normal mode and advance mode
respectively.
DSP
Position
SRS Circle Surround II
Parametric equalizer
Time alignment
Crossover
Multi-harmonizer
Non-fader phase
Non-fader output
Sound data
E-iSERV sound effect
customizations
(Parametric equalizer)
E-iSERV sound effect
customizations
(Time alignment)
E-iSERV sound effect
customizations
(Crossover)

How to operate the Sound Adjustment Mode

Normal mode
(See page 125)
(See page 126)
(See page 128)
(See page 129)
(See page 127)
(See page 130)
115
Advance mode
(See page 132)
(See page 133)
(Simplified)
(See page 139)
(See page 145)
(See page 146)
(See page 147)
(See page 148)
(See page 121)
(See page 121)
(Simplified)
(See page 121)
(See page 121)
IX