Fujitsu ECLIPSE CD8445 Owner's Manual page 36

ESN security operating procedure
● If the security code does not match the information recorded by
● If [ERR5] (the 5th time an error has occurred) appears, [HELP] will
Canceling ESN security lock using Memory Stick
If a Memory Stick has already been inserted, a [MS EJECT] message
appears. In this case, eject the Memory Stick and insert again. (Refer
to "Ejecting the Memory Stick" on page 94 for details on ejection of
the Memory Stick.)
[DISC] button
Press the [FUNC] button for more than one second.
If the security code matches the code recorded by the deck,
[OK] will appear on the display and the security function will be
canceled.
the deck, [ERR_] (ERR and the error number) will appear on the
display for two seconds, and then [- - - -] (security code entry
display) will appear. If this happens, check the security code and
repeat the procedure from step 2.
appear. When [HELP] appears, carry out the operations for an
ESN security lock out by following the procedure in " What
happens if a Memory Stick or security code is incorrect?" on page
37.
After the battery is connected and the deck's power
is turned on, [SEC] will appear on the display for two
seconds. After this, [- - - -] (security code entry
display) will appear.
Press the [DISC] button.
[MS] will appear on the display. If you press the [DISC] button
once more, the display will return to [----] (security code entry
display).
Insert the Memory Stick that has been recorded, and
then close the front panel.
The recorded data will be read from the Memory Stick.
[FUNC] button
36