Position Selector Setting (Position) - Fujitsu ECLIPSE CD8445 Owner's Manual

How to operate the Sound Adjustment Mode

Position selector setting (POSITION)

When the position of the listener's seat is selected, the time taken
for the sound to travel from the speakers to the listener can then be
adjusted in order to obtain a more natural sound orientation. This
deck allows up to four different positions to be set.
If the position selector has been set (to a setting other than OFF), the
BAL (balance) and FAD (fader) settings will be canceled.
Turn the [SEL] button to select POSITION.
Press the [SEL] button.
The mode will change to position selector setting mode.
Turn the [SEL] button to select the setting item.
When the button is turned, the setting item changes in the
following order.
Front L Front R
Press the [SEL] button.
The selected settings will take effect.
Press the [RTN] button.
At this time, other adjustments can also be made in normal
mode.
Press the [SOUND] or [RTN] button to exit sound
adjustment mode.
[SOUND] button
[SEL] button
Front Rear
126
[RTN] button
OFF