Eclipse AVN6620 Owner's Manual page 152

Helpful tips
3. Accuracy and error
When searching for a route, the
route display may not appear in
time for the next turn.
Route search
• The time it takes the device to reinitiate a route search while driving on a highway may be
lengthy.
• When correcting the present location mark manually and then driving under conditions
where the positioning is not corrected, the position will not be properly indicated.
• The route may not change even if reinitiating a search.
• If having set a present location, destination or transit point on a remote island or in an area
where there are no guidable roads, the device may not search for a route.
• The device may not search for a route if the present location and the destination are in
close proximity.
• The route guidance will not necessarily recommend toll roads even if having selected to
prioritize toll roads in the search conditions.
Similarly, even if having selected not to prioritize toll roads, a route using toll roads may be
displayed.
(The "Prioritize/Do not prioritize toll roads" setting enables the prioritization of either toll
roads or local roads when a selection of one is made possible.)
152
In case of multiple destinations,
when having bypassed the next
destination, a route search is
reinitiated to provide a route
returning to it.
Search
While providing guidance on
where you are headed, several
geographical names may be
indicated.
Drive following the actual traffic
regulations.