Pf Roller Assembly Removal - Epson Stylus COLOR 670 Service Manual

EPSON Stylus COLOR 670

4.2.5.10 PF Roller Assembly Removal

1. Remove the Housing.(See "Housing Removal" on page 72)
2. Remove the ASF Assembly. (See "ASF Assembly Removal" on page 85)
3. Remove the Torsion Spring117.6 from the rear side of the Top Frame and
remove the Upper Paper Guide Assembly toward the rear side of the
printer.
When removing the Upper Right Paper Guide Assembly, be careful for PE
Sensor Lever Head and remove it toward the front side of the printer.
Upper Right Paper
Guide Assembly
Front Side of the Printer
Figure 4-45. Paper Guide Assembly Removal
4. Remove 3 screws and remove the Front Frame from the Printer
Mechanism. (See Figure 4-46.)
5. Remove 2 screws to remove the Paper Eject Frame from the Printer
Mechanism. When removing the Paper Eject Frame from the Printer
Mechanism, shift the CR Unit to the CR Shaft left direction by hand and
remove it from the Paper Eject Frame toward the front side of the Printer
Mechanism. Then shift the CR Unit to the center of the CR Shaft and
remove the left side of the Paper Eject Frame toward the front side of the
printer. (See Figure 4-46.)
Disassembly and Assembly
Spring Holders
Rear Side of the Printer
Disassembly
Paper Eject Frame
Fixing Screws
Front Frame Fixing Screws
Figure 4-46. Front Frame and Paper Eject Frame Removal
6. Release 2 hooks securing the Front Paper Guide to the Paper Eject Roller
and remove it to the front side of the printer.
Front Paper Guide
Front Paper Guide
Securing Hooks
Figure 4-47. Front Paper Guide Removal
Revision A
96