Epson Stylus COLOR 670 Service Manual page 114

EPSON Stylus COLOR 670
5. Click OK and the following screen appears.
Figure 5-17. Bi-d Adjustment Value Input Screen
6. Enter the number of the correct adjustment pattern. If none of the
patterns are correct, estimate a number based on a comparison of the
current pattern and the two samples and enter that number. Click OK.
7. To print the pattern again, click Previous two times to get back to the
correct screen. Then select "Print the Bi-D adjustment pattern" and click
OK.
8. If the central three lines of the adjustment pattern are not aligned, repeat
from step 3 to step 7.
NOTE: You can check the current adjustment data by the following
operation.
Select "Check present adjustment data" and click OK, then
click OK in the next screen.
Adjustment
Figure 5-18. Checking present adjustment values
Figure 5-19. Current bi-d adjustment values appear on screen
Using the Adjustment Program
Revision A
114