Turning SelecType mode on
To turn SelecType on make sure that the printer is on (with the
POWER, READY, and ON LINE lights all on), and then press both
ON LINE and FF at the same time, as illustrated in Figure 2-l. The
HomeWriter- beeps to signal that the SelecType mode is on; the
READY light turns off; and the ON LINE light begins flashing. Now
that SelecType mode is on, the panel has new functions (also shown in
Figure 2-l).
Figure 2-1. SelecType setting and functions
In SelecType, each touch-sensitive rectangle has a function: ON
LINE selects typestyles, FF sets the styles, and LF turns SelecType off,
returning the panel to its standard operation.
Using SelecType
Once you have turned on SelecType, you select the typestyle you
want according to Table 2-l. The mode number in the table is the
number of times you press ON LINE to select each function. Each time
you press ON LINE, the printer beeps.
10