Assignment Of The Digital Audio Input; Audio Connection In Hdmi (Dvi) Devices - Loewe SPHEROS R 32 Operating Instructions Manual

Operating additional equipment

Assignment of the digital audio input

Your TV set can assign an AV input to the digital audio input socket
AUDIO DIGITAL IN. When switching over to this AV input, the digital audio
signal at the AUDIO DIGITAL IN input is passed on to the integrated Dolby
Digital Decoder and the digital audio output socket AUDIO DIGITAL OUT.
You will hear the digital sound of the assigned AV input, if available, in
place of the analogue sound.
Connecting devices to the digital audio input
You must feed the digital audio signal to the TV set for sound reproduction
from an external device, e.g. from the DVD player.
Reproduction of the external digital audio signal can be played back via
the Dolby Digital Decoder integrated in the TV set or via an externally
connected digital audio amplifier.
If an external audio amplifier is used, this must be regis-
tered in the sound components wizard (see page 44).
Call TV menu.
Select Connections,
go to the menu line below.
Select Miscellaneous,
go to the menu line below.
Select Assign digital audio input,
go to the menu line below.
Select AV input.
TV menu
Connections
Miscellaneous
Assign digital audio input
no to AV1
To connect a DVD player to the digital audio input of the
TV set for example, connect the digital output socket of
the DVD player (DIGITAL OUT) via a cinch cable to the
AUDIO DIGITAL IN socket on the TV set.
DVD player
to AV2 to AVS to HDMI1/DVI
AUDIO DIGITAL IN
AV1
MULTICHANNEL AUDIO OUT
LEFT CENTER LEFT
REAR FRONT
DIGITAL AUDIO OUT
STEREO OUT VIDEO OUT
PCM/MPEG2/AC3/DTS
MAINS
RIGHT SUBW. RIGHT R L (CVBS) (Y/C)
DIG OUT S-VIDEO OUT
OPT OUT REAR FRONT AUDIO VIDEO OUT
The DVD player is already registered at AV1 in the connection
wizard at the factory.
If new devices are connected and registered in the
connection wizard, the digital audio input AUDIO DIGITAL
IN is assigned in the connection wizard (see page 36).

Audio connection in HDMI (DVI) devices

Devices with DVI connection
If an external device with DVI interface is connected via a HDMI/DVI
adapter to the HDMI1/DVI or HDMI2/DVI socket of the TV set, you can
connect the digital sound of the external device to the digital audio input
socket AUDIO DIGITAL IN.
The assignment of the digital audio input to the corresponding HDMI
socket of the TV set takes place as described in the column on the left.
If you want to use the analogue sound of the external devices, connect
it to the AUDIO IN2 socket.
Devices with HDMI connection
If external devices with HDMI interface are connected to the HDMI1/DVI
or HDMI2/DVI socket of the TV set, no assignment of the audio input is
necessary because the digital transmission of picture and sound takes
place via one connection in HDMI.
INFO END
to HDM
TV set
I
AUX- I /O
II
TO TV- I /O
45 -