Table of Contents
Advertisement
External devices
Assignment of the digital audio input
In order to be able to hear the digital sound of an external device con-
nected to an AV input, an AV input can be assigned to the digital audio
input socket AUDIO DIGITAL IN. By switching to this AV input, the digital
audio signal at the AUDIO DIGITAL IN input is communicated to the integral
digital multi-channel audio decoder and the digital audio output socket
AUDIO DIGITAL OUT. You will then hear the digital sound of the assigned
AV input instead of the analogue sound if available.
Connecting devices to the digital audio input
For the digital audio playback from an external device, e.g. the DVD player,
you have to feed the digital audio signal to the TV set.
The external digital audio signal can be reproduced via the digital multi-
channel audio decoder integrated in the TV set, via an externally connected
digital audio amplifier or via a Loewe Individual Sound Projector SL.
➠ If an external audio amplifier or Loewe Individual Sound
Projector is used, this must be registered in the sound
components wizard (see page 124).
MENU: Call TV menu.
Select Connections,
go to the menu line below.
Select Miscellaneous,
go to the menu line below.
Select Assign digital audio input,
go to the menu line below.
Select AV input.
TV MENU
Connections
Miscellaneous
Assign digital audio input
no
to AV
To connect a DVD player to the digital audio input of the
TV set for example, connect the digital output socket of
the DVD player (DIGITAL OUT) via a cinch cable to the
AUDIO DIGITAL IN socket on the TV set.
Connection example for a DVD player, see right hand
column.
DVD player
DIGITAL
Audio connection in HDMI/DVI devices
External devices with DVI connection
If an external device with DVI interface is connected via a HDMI/DVI
adapter to one of the HDMI sockets of the TV set, you can connect the
digital sound of the external device to the digital audio input socket
AUDIO DIGITAL IN.
The assignment of the digital audio input to the corresponding HDMI
socket of the TV set takes place as described in the column on the left.
If you want to use the analogue sound of the external device, connect
it to the AUDIO IN socket.
External devices with HDMI connection
If external devices with an HDMI interface are connected to one of the
HDMI sockets of the TV set, no assignment of the audio input is necessary
because the digital transmission of picture and sound takes place via a
single connection in HDMI.
to AVS
to HDMI1
to HDMI2
to H
Serial interface RS-232C (RJ12)
You can connect either the Loewe Individual Sound Projector SL or a home
network system of different manufacturers (e.g. AMX, Crestron) to your
TV set via the RS-232C (RJ12) interface.
Please consult your dealer for configuration of the RS-232C (RJ12) interface
and further information about the different home networking systems.
AV
OUT
TV set
AUDIO
AV
DIGITAL
IN
125 -
Advertisement
Table of Contents
