Adjusting The Picture; Operation Without Remote Control - Loewe SPHEROS R 32 Operating Instructions Manual

Daily operation

Adjusting the picture

Call TV menu.
TV menu
Picture
Picture adjustment
Select Picture,
go to the menu line below.
TV menu
Picture (standard values, TV digital)
Picture adjustment
Standard values (TV digital)
Select the desired picture function,
go to the menu line below.
Make changes.
Explanations of the picture settings
Switches the picture parameters between standard and
Picture
adjustment personal values.
Adjust contrast.
Contrast
Colour intensity Adjust the colour.
Colour Set warmer or cooler tints for the picture.
temperature
Brightness Adjust the brightness of the picture.
Adjust the contour sharpness of the picture.
Sharpness
DNC Removes or reduces the signal noise in the picture.
more ... Call with OK.
Image+ Image improvement on/off and demo mode.
Setting possibilities for the picture format (see page 20).
Picture format
Vertical Move picture vertically (see page 20).
picture hold
Auto format With Auto format switched on, the TV set recognises the
picture format for Cinemascope or wide screen movies
and adapts accordingly.
Reduce image jolting.
DMM
Standard values / personal values for picture adjustment
Call TV menu.
Select Picture,
go to the menu line below.
Select Picture adjustment,
go to the menu line below.
INFO END
Sound Recording Connections Settings
...
INFO END
Contrast Colour intensity
...
TV menu
Picture (personal values, TV digital)
Picture adjustment
Standard values (TV digital)
Select desired values for picture,
OK call selected values for picture.
Explanations for picture adjustment
Custom adjustments of contrast, colour intensity, colour temperature,
brightness, sharpness and digital noise supression are saved in the per-
sonal values. There are separate personal values for every signal source
C
(TV analog, TV digital, HD analog, HD digital, PC, PhotoViewer).
By selecting Standard values the picture parameters are reset to factory
values for the respective currently active signal source.
For an explanation of the signal source; see glossary: Signal input
groups.
In the index of the TV set, all the picture and sound adjustments can be
reset to the factory values for all signal sources in one step under Reset pic-
ture/sound or Initialise picture/sound or Factory settings picture/sound.

Operation without remote control

Changing the station on the TV set
+ / – Station up/down.
Switching radio on or off or switching to radio
R Radio on / off or switching between TV and radio.
Calling the TV menu on the set
Service is for customer service personnel only.
M call Direct control on TV set menu,
Direct control on TV set
election Volume
19
– / + select function.
M or R go to the menu line below,
– / + make changes.
M move up one menu line,
– / + select other function.
INFO END
Personal values (TV digital)
OK
Brightness Contrast Picture format Stat
19 -