Table of Contents
Advertisement
Operating additional equipment
Assignment of the digital audio input
In order to be able to hear the digital sound of an external device con-
nected to an AV input, an AV input can be assigned to the digital audio
input socket AUDIO DIGITAL IN. When switching to this AV input, the
digital audio signal applied to the AUDIO DIGITAL IN input is passed on
to the digital audio output socket AUDIO DIGITAL OUT. You will then
hear the digital sound of the assigned AV input instead of the analogue
sound if available.
Connecting devices to the digital audio input
For the digital audio playback from an external device, e.g. the DVD player,
you have to feed the digital audio signal to the TV set.
The external digital audio signal can be played back via an externally
connected digital audio amplifier or Loewe Auro.
➠ An external audio amplifier must already be set in the
sound components wizard (see page 53).
Call TV menu.
Select Connections,
go to the menu line below.
Select Miscellaneous,
go to the menu line below.
Select Assign digital audio input,
go to the menu line below.
Select AV input.
TV menu
Connections
Miscellaneous
Assign digital audio input
no
to AV1
To connect a DVD player to the digital audio input of the
TV set for example, connect the digital output socket of
the DVD player (DIGITAL OUT) via a cinch cable to the
AUDIO DIGITAL IN socket on the TV set.
- 54
INFO
END
to AV2
to AVS
to HDMI1/DVI
to HDM
DVD player
If new devices are connected and registered in the
connection wizard, the digital audio input AUDIO DIGITAL
IN is assigned in the connection wizard (see page 45).
Audio connection in HDMI (DVI) devices
External devices with DVI connection
If an external device with DVI interface is connected by an HDMI/DVI
adapter to one of the HDMI/DVI sockets of the TV set, you can connect
the digital sound of the external device to the digital audio input socket
AUDIO DIGITAL IN.
The assignment of the digital audio input to the corresponding HDMI
socket of the TV set takes place as described in the column on the left.
If you want to use the analogue sound of the external device, connect
this to the AUDIO IN1 socket.
External devices with HDMI connection
If external devices with HDMI interface are connected to one of the HDMI/
DVI sockets of the TV set, no assignment of the audio input is necessary
because in HDMI the picture and sound are transmitted digitally via one
connection.
RS-232C interface (upgradable interface)
You can connect a home network system of different manufacturers (e.g.
AMX, Crestron) to your TV set via the upgradable RS-232C interface.
For the configuration of the RS-232C interface and further information
about the different home networking systems, please contact your dealer.
AUDIO DIGITAL IN
AV1
TV set
Hide quick links:
Advertisement
Table of Contents
